1. Home
  2. All Products

4% Phos Pressed

Product number: 58603

Outstanding mineral supplement block that is designed for medium to high quality forages or in conjunction with STOCKADE protein supplements. Delivers 4% phosphorus in addition to full trace mineral fortification at 100% of NRC recommendations. These convenient, weather resistant blocks don’t need costly feeders or bunks and can be placed directly on the ground if desired. No additional salt or mineral is needed.

Download Product Info
4% Phos Pressed

Product Info

 

For Beef Cattle on Pasture

  • 4% Supplemental phosphorus
  • Fits any grazing situation
  • Same trace mineral and vitamin fortification as 8% and 12% Phos Blocks
  • Allows for flexibility as conditions and forages change
  • Trace mineral fortification at 100% of NRC recommendations
  • Perfect complement to protein supplements

NET WEIGHT: 40 lbs.

Nutrient Guarantee

Calcium, Min6.00%
Calcium, Max7.20%
Phosphorus, Min4.00%
Salt, Min15.00%
Salt, Max18.00%
Magnesium, Min1.00%
Cobalt, Min10 ppm
Copper, Min1,000 ppm
Iodine, Min50 ppm
Manganese, Min4,000 ppm
Selenium, Min26 ppm
Zinc, Min3,000 IU/lb
Vitamin A, Min100,000 IU/lb
Vitamin D-3, Min10,000 IU/lb
Vitamin E, Min100 IU/lb

Product Ingredients

Processed Grain By-Products, Monocalcium Phosphate, Dicalcium Phosphate, Salt, Molasses Products, Roughage Products, Calcium Hydroxide, Calcium Carbonate, Magnesium Oxide, Hydrolyzed Vegetable Oil, Manganous Oxide, Manganese Sulfate, Zinc Oxide, Zinc Sulfate, Copper Sulfate, Selenium Yeast, Brewer’s Dried Yeast, Ethylenediamine Dihydroiodide, Calcium Iodate, Cobalt Carbonate, Vitamin A Supplement, Vitamin D-3 Supplement, Vitamin E Supplement and Mineral Oil.

Product directions

CAUTION: USE AS DIRECTED. Consumption of selenium should not exceed 3 mg per head daily.

WARNING: This product, which contains added copper, should not be fed to sheep or any species with a low tolerance to supplemental copper.

Feeding Recommendations:

  1. Feed 1 block per 5 to 15 head of cattle. This allows all animals equal access to blocks.
  2. Place the blocks where animals congregate. Locate blocks throughout the pasture at loafing, grazing and watering areas. Adequate distance must be maintained between blocks to prevent crowding - 10 feet minimum.
  3. Do not allow animals to run out of blocks. When a block is two-thirds consumed, provide a new block near it. Place very small pieces in a feed pan or trough to be clean up.
  4. Cattle should consume about 4 oz. per head daily. When cattle consume the block at the recommended rate, it will supply 3.0 mg of supplemental selenium.
  5. Blocks can be fed to animals in confinement. Exact location of block to obtain desired consumption will vary between confinement feeding programs.
  6. Feed as the only self-fed source of salt or other minerals and vitamins. Provide fresh, clean water at all times.